How do I configure aux LED colors?

To configure aux LED colors, start from the mode you want to configure, such as Off or Lockout mode.

Anduril (V1 & V2 — identical):

1. Click the button 7 times to enter the aux LED configuration mode.
2. The aux LEDs will change to the next mode supported on this light, indicated by 7C: Next aux LED mode.
3. To change the aux LED color, click the button 7 times and then hold the button on the last click.
4. While holding, the aux LED color will cycle through the available colors.
5. Release the button when the desired color is reached, using 7H: Next aux LED color.

The colors typically follow this sequence:

• Red
• Yellow (Red+Green)
• Green
• Cyan (Green+Blue)
• Blue
• Purple (Blue+Red)
• White (Red+Green+Blue)
• Disco (fast random colors)
• Rainbow (cycles through all colors in order)
• Voltage (uses color to display battery charge)

Biscotti (12-Group): This feature does not exist in Biscotti firmware.

Source: Anduril V1 Manual — Aux LEDs / Button LEDs ; Anduril V2 Manual — Aux LEDs / Button LEDs